|
Ergonomic, 37 inch working height. Electric blade and clamp drive. Electric back gauge drive with touchpad for easy programming. Front table digital display (cm or inches) with multilingual operator guidance. Digital display accurate to 1/10 mm or 1/100 inch. Stores 99 programs with up to 99 steps in each (up to 15 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes.
Memory key for repeat cuts. Automatic SET function for reference measurement and EJECT function for pushing out paper. Self-diagnostic system with error indication on display. Electronic hand wheel with variable speed control for manual back gauge setting. Bright, LED optical cutting line. 3-step, LED front table illumination; Adjustable, spindle guided back gauge with narrow separations and plastic gliders. Dual side guides on front and rear tables. High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Includes stand with storage shelf, easy-access tool holder, and paper blocking tool. Optional side tables increase work surface.
Cut Length: | 25 1/2" inches |
Capacity: | 3" |
Type: | Electric |
Narrow Cut: | 1" |
Depth Behind Knife: | 24" |
Motor: | 2 HorsePower |
Size: | 48" D x 39" W x 51" H (61 1/2" W with side tables) |
Warranty: | 1 Year |
Power: | 115 V, 60 Hz (20 amp dedicated line required) |
Shipping Weight: | 775 lbs. (795 lbs. with side tables) Pounds |
PL140IC 5-1/2 inch Pouch Laminator $0.00 |
Personal Velobind Strips- 6 Prong $0.00 |
Practik 40" Utility Cutter $0.00 |
PL-260 Pouch Laminator $0.00 |
Velobind 510 $0.00 |
1 x BLADE INSERT/SIDE SLITTER 5031 | $29.48 |
1 x PowerHouse PF17 Paper Folder | $999.00 |
1 x NONSTK-PIN GROOVE.125D X.75 | $20.05 |
1 x NONSTK-ELBOW MALE SWIVEL1/4 TO 1/8NPT | $60.78 |
1 x SPROCKET, 24 TOOTH 1108 BORE | $208.18 |
1 x I/F Cable Unit, DBM-400STL | $263.94 |
1 x Photo Sensor Set/DF-915,920 | $67.27 |
1 x 60953 Evolution 2 Bench for the 124" Evolution E2 | $1,066.50 |
1 x Shelf Push Pins | $49.50 |
1 x DISCONTINUED BLOCK SWITCH L4 | $478.81 |
1 x VersaBind-E Electric Punch and Binding Machine | $2,172.00 |
1 x TRANSFORMER 600205 | $1,257.34 |
1 x Support Plate/DFC-12 | $297.32 |
1 x BEARING, MOD., 2BOLT FLANGE | $340.64 |
1 x Yellow "T" Silicone Cords | $39.15 |
1 x NONSTK-ELBOW MALE 1/4 TO 1/4 NPT | $56.70 |
1 x STACK TRAY WIRE FORM | $36.00 |
2 x Binding Workstation | $438.00 |
1 x BUSHING, MODIFIED | $129.96 |
1 x Cart for the PB2000T Perfect Binder | $599.00 |
1 x PIN 1GMM0019703AZ | $122.28 |
1 x 1217 FEED WHEEL Use W-A1217 | $69.12 |
1 x VersaBind-M Manual Punch and Binding Machine | $1,169.00 |
1 x PCB 761021 | $3,520.47 |
1 x GUIDE SIDE JTFY >USE 1771030 | $161.88 |
1 x ROUND MASTER SWITCH 9003390 | $356.80 |
1 x BCS210 Business Card Slitter | $1,685.00 |
1 x Finned Saddle Clip | $37.95 |
1 x PH 900 9" Pouch Laminator | $0.00 |